This system contains two C15.2 tops and 2 Sub 1.18 bins Powermate 1000 mk3

This is a 2000 watt system 

C 15.2

In the C 15.2, DYNACORD is offering an extremely compact, trapezoidal 15" / two-way full-range cabinet boasting very good power handling (500W continuous / 2000W peak) and sensitivity of 100 dB 1W / 1m for applications requiring an extended low end.Here, an SMX 2151 woofer is used, whilst in the high frequency range a DH3 compression driver in a 90° x 50° constant directivity horn reproduced everything above 1550 Hz.. Flying points for eyebolts are provided to permit either vertical or horizontal suspension. Also available as an option is the DC-MBC15-UMH mounting bracket, which is compatible with the DYNACORD PI-Easy system and supports up to three levels of orientation.To extend the low bass performance, a Sub 1.18 subwoofer connected in parallel is recommended.

Dynacord POWERMATE 1000-3,

Reference-Powermixer, 2x 1000 W/4 Ohm RMS, 2x 600 W/8 Ohm, 2x 1350 W/2,7 Ohm, 6 Mic/Line XLR in with 3 Band-EQ with para. Mids, 4 Mic-/Stereo-Line Kombi-Inputs with 3 Band-EQ, 2 x 24 bit Stereo-Effect, 2x FX/AUX for internal FX, 2x Aux pre/post switchable, 2x Monitor Aux (pre), Mute per channel, switchable 80 Hz Low Cut, switchable Voice Filter per XLR Input, Feedback-Filter for Mon 1-2, new 11-Band-Master EQ, B-Master out for Recoding or Mono-Subwoofer etc., USB Connector for Playback or output for Recording-application (up to 4 Tracks sim.), internal Midi-Interface Midi in/out, switch mode amp, internal speaker protection, Speakon-out,